3rd Grade- Complementary Creature Prints!

3rd graders did such a fantastic job printmaking!! Take a look below!

(Read more below the pics to find out how they were created, and to view my YouTube tutorial on this lesson!)

This lesson took about 5 (40 min.) art classes to finish, and create three prints of one drawing. We used markers and styrofoam printing plates to create our prints.

DAYS 1-2 

On the first day of the lesson, I showed students prints students created from previous years as well as my own examples. Then I showed them the first portion of my video tutorial and discussed what printmaking was. The book Where the Wild Things Are by Maurice Sendak was inspiration for this lesson.

Kids then got to work drawing their own made up creature on 8.5″ x 11″ regular printer/copy paper with pencil. The goal was to create a unique creature, large on the paper, with simple lines and details. I explained their creature could consist of a combination of animals, aliens, monsters, inanimate objects, people, sea creatures, food, fantastical creatures….whatever they wanted!  Something that was from their own imagination.

(I didn’t get a chance to take photos of kids drawing so this pic and the next few with the pink background are ones I created for my video tutorial)

My example drawing

Once drawn, students then taped their drawing onto a sheet of styrofoam (the printing plate) to trace. Being sure to tape it to the top in two areas where there wasn’t any image, so the paper wouldn’t move on them while tracing.

Then using a dull colored pencil; not too sharp (if its too sharp, it could tear or puncture the styrofoam) they traced over all their lines pressing firmly but not super hard, to transfer their image to the printing plate underneath. I have them use a colored pencil so they can see where they’ve already traced over their pencil lines.

Below you can see the image has transferred to the styrofoam plate.

Once that’s done, students trace over all their lines indented in the styrofoam plate. They used a colored pencil for this step as well. The reason they trace twice (once with their drawing over the styrofoam and once on the styrofoam only) is so the indentations are deep enough for printing a crisp, clear image of their drawing.

Styrofoam plate all ready for coloring in with markers!

DAYS 3-5 

Students learn what complementary colors are, (colors opposite one another on the color wheel and consist of one primary color and one secondary color. (red + green, blue + orange, and yellow + purple).

 

Students learned that when complementary colors are used next to one another in artwork, it makes an image pop and helps make the artwork stand out.

On the styrofoam using regular washable Crayola markers, they colored their creature with one set of complementary colors, and then their background with a different set.  It’s important that the markers are juicy (aren’t dried out) for this. (I saved and set aside a large box of markers for just this lesson, to ensure students would have juicy markers!)

After the styrofoam is completely colored, they take off their taped on drawing and sprayed a sheet of 9×12″ 80# drawing paper using water from a spray bottle. (For the spray bottles, I just use recycled empty spray cleaner bottles after thoroughly rinsing out).

They sprayed the paper 6 times- two on top on either side, two in the middle on either side and two along the bottom on either side of the paper.

Then using a damp sponge, they hold down the paper along the bottom, and gently wipe going away from their fingers in one direction to help spread the water evenly all over the paper.

They then lay their colored styrofoam, color side down, onto the wet paper. They press all over the back of their printing plate using the flat of their hands to help transfer their image to the dampened paper. After pressing all over for about 10 seconds, they used a brayer (which is like a mini paint roller except it has a rubber roller) to roll over the back of their printing plate to help further push and transfer the marker to the damp paper to create their print.

(I explain to students it’s VERY important to always have one hand holding down the styrofoam plate, while pressing with their other hand or using the brayer, so they don’t move their styrofoam which would smudge their print, thus creating a blurry one).

Students roll the brayer over the entire backside of their plate for at least 15 seconds. Then while holding down a corner with one hand, they lift the opposite corner with the other hand to check if there are any bald spots. If there are any bald spots (where their isn’t any color), they roll over that area again and/or use their fingers to press into any smaller detailed areas where needed. 

Once they check all areas, they lift off the styrofoam plate to reveal their print!

There are a lot of steps involved in creating these prints, which can be tricky to remember!  So I have students watch the printmaking steps of my video tutorial in the beginning of the first couple of art classes when they have begun printing, to review and help them remember!

I’m so glad I decided to make that video for this lesson! Students find it helpful to watch and such a time saver from constantly having to set up and waste paper and marker ink each time as I would while demonstrating…. and since it’s recorded- I don’t ever have to worry about forgetting to tell them something!

Once they print their first print, they repeat the process of coloring their printing plates and wetting their papers to print, and pressing to create 3 prints of the same image total. This way, students have some practice with printing and have the opportunity to create a good, clear, colorful print!

Here is my video tutorial on this lesson!

https://youtu.be/njw-xLPtq_k

Thanks so much for stopping by! To view other art tutorial videos I’ve made click on “Art Instruction Videos” under the drop down menu or visit my YouTube channel!

Continue Reading

COMPLEMENTARY CREATURE PRINTS! – 3RD GRADE

3rd graders finished up their prints! They did such a fantastic job!! Take a look below! 

(Read more below the pics to find out how they were created, and to view my YouTube tutorial on this lesson!)

(haha don’t mind the “Dirty Water Bucket” in the background ….I don’t have a sink in my art room and use a water bucket system to dump out old water between art classes. I’ll probably blog about how I go about that for lessons involving paint at a later time. If you’re an art teacher and don’t have a sink in your room, please share what methods you use!) 

A panoramic picture of the 3rd grade prints –up now on display!! I love all the bright colors!

And then a pic of the same display… only non-panoramic because sometimes I can’t decide which way to post it!

 

This lesson took about 4 (40 min.) art classes to finish, and students created three prints of one drawing total. We used markers and styrofoam printing plates to create our prints! 

DAYS 1-2 

On the first day of the lesson I read students the book Where the Wild Things Are by Maurice Sendak for inspiration. We discussed what printmaking was and I showed them students prints from previous years as well as my own teacher examples. They also watched the first few minutes of my video tutorial before they began drawing their own creatures.

Kids then got to work drawing their own made up creature on 8.5″ x 11″ regular printer/copy paper with pencil. The goal was to create a unique creature, large on the paper, with simple lines and details. I explained their creature could consist of a combination of animals, aliens, monsters, inanimate objects, people, sea creatures, food, fantastical creatures….whatever they wanted!  Something that was from their own imagination.

(I didn’t get a chance to snap pics of kids doing this step so this pic and the next few with the pink background are ones I created for my video tutorial) 

 

Once drawn, students then taped their drawing to a sheet of styrofoam (the printing plate). They only taped it to the top in two areas so the paper wouldn’t move on them while tracing.

Then using a dull colored pencil (not to sharp–if its too sharp, it could tear or puncture the styrofoam) they traced over all their lines to transfer their image to the printing plate underneath. I have them use a colored pencil so they can see clearly where they’ve already traced.

 

Here you can see the image has transferred to the styrofoam plate

 

Once that’s done, students trace over all the lines indented in the styrofoam plate once more. They used a colored pencil for this step as well. They trace twice so the indentations are deep enough for printing a crisp, clear image of their drawing.

 

DAYS 3-4 

Students learn what complementary colors are, (colors opposite one another on the color wheel and consist of a primary color and a secondary color–red + green, blue + orange, yellow + purple). They learned that when used next to one another in artwork it makes an image pop and really stand out.

They colored their creature (on the styrofoam printing plate) with one set of complementary colors, and then their background with a different set, using markers. I saved and set aside a large box of markers for just this lesson to ensure we’d have juicy markers!

Students were creative and made some cool unique creatures!! 

 

After completely colored, they took off their taped on drawing (if they haven’t already) and dampened a sheet of 9×12″ 80# drawing paper using water from a spray bottle and damp sponges –(For the spray bottles, I just use empty spray cleaner bottles after thoroughly rinsing out).

They sprayed the paper 6 times- two on top, two in the middle and two along the bottom on either side of the paper.

Then using a damp sponge, they hold down the paper along the bottom, and wipe going away from their fingers in one direction to help spread the water evenly all over the paper.

 

They then lay their colored styrofoam color side down onto the wet paper. They press all over the back of their printing plate using the flat of their hands to help transfer their image to the dampened paper. After pressing for a few seconds, they used a brayer to roll over the back of their printing plate to help further transfer their image. I explain to students it’s very important to always have one hand holding down the styrofoam plate so they don’t smudge their print.

Students roll the brayer over the entire backside of their plate for at least 15 seconds, then while holding down a corner with one hand, lift the opposite corner with the other hand to check if there are any bald spots. If so, they roll over that area again and/or use their fingers to press into any smaller detailed areas where needed.  Once they check again, they lift off the styrofoam plate to reveal their print!

I have students watch the printmaking portion of my video tutorial in the beginning of the first couple of art classes where they print, just to help them remember all those steps!

So glad I decided to make that video for this lesson! It’s such a time saver…. I don’t have to waste paper or marker ink each time as I would in a demonstration for the kids…. and since it’s recorded- I don’t ever have to worry about forgetting something while explaining!! I wish I had started make youtube tutorials a long time ago for those reasons!

Also— if I must be completely honest, students are way more engaged and STAY silent throughout the ENTIRE time watching my video— rather than when I am demonstrating in person under the doc camera! What’s up with that kids?!??!

As you can see in the photo above I have printing supplies (pre-dampened sponges, spray bottles, brayers, 9×12″ paper, and box of fresh new markers) along my extra “supply” table. Kids get their needed supplies and bring them back to their seats and print there. Water bottles, sponges and brayers are shared so I don’t need a ton of each.

Once they print their first print, they repeat the process of coloring their printing plates and wetting their papers to print  etc. to create 3 prints of the same image total. This way, students have some practice with printing and have the opportunity to create a good, clear, colorful print!

Click HERE to view my video tutorial on this lesson!

Hope you enjoyed reading this blog post! If interested, you can get email updates on when I blog next by signing up with your email over on the right hand side of the top of this page!

I’ll be posting again REAL SOON on new 1st grade, 2nd grade, and 4th grade artwork!! STAY TUNED!!!……

 

 

Continue Reading